Adhesive mortar is applied on the back of the thermal insulation board, which should be placed on the socle profile without any gaps (Figure 1). Thermal insulation boards are adhered to the wall by sliding slightly to ensure full contact with the wall. Board levels should be checked by straight edge or a water gauge (Figure 2).
Thermal insulation boards are placed without gaps and in zigzag style upwards starting from the bottom of the wall. Boards should be placed in zigzag style on the corners as well (Figure 3).
Attention should be paid to place the boards properly and not to damage the edges. Damaged boards should not be used, while boards with worn edges should be filed before application. No gaps should be left between boards during application, and thin gaps should be filled by using insulating tape or foam.